BST - Battery Safety Terminal emulator Installation Instructions

It is a diagnostic device for testing. It is universally applicable and can be used for all BMW models with a faulty battery safety terminal.

It sends to the car’s computer information that a battery safety terminal is intact. After installation the airbag/srs indicator can be easily switched off using diagnostic machine. 

It does not affect other SRS components. In case of a collision all properly working airbags will be deployed!

You can use the emulator in every model of BMW. The pictures in the instructions show E60 and E90 model. Please remember that in your car it can look a little different.

The installation should be performed by a professional mechanic, knowledgeable in the SRS. We can share our knowledge and experience with you, but should the problem become more complex, you need to possess an adequate knowledge for us to be able to help you.

The emulator should be connected in place of Battery Safety Terminal (BST). 

Below there are pictures of the BST emulator installation on:

• BMW 5 Series E60

• BMW 3 Series E90

• BMW USA X3 E83

BMW 5 Series E60


You can find BST next to the battery located in trunk. 

Find the wire that connects BST with the car installation. 

Connect the emulator to the car installation. To this end, cut the wire connecting BST with the car installation and fit the emulator instead of BST.  

 

BMW 3 Series E90

 Battery Safety Terminal emulator installation - Step 1

You can find BST next to the battery located in trunk. 

Battery Safety Terminal emulator installation - Step 2

Battery Safety Terminal emulator installation - Step 3

Battery Safety Terminal emulator installation - Step 4

Battery Safety Terminal emulator installation - Step 5

Find the wire that connects BST with the car installation. 

Battery Safety Terminal emulator installation - Step 6

Battery Safety Terminal emulator installation - Step 7

Connect the emulator to the car installation. To this end, cut the wire connecting BST with the car installation and fit the emulator instead of BST.
In the last picture instead of "airbag simulator" there should be the BST emulator - we are sorry for any inconvenience. 

 

BMW USA X3 E83

 Battery Safety Terminal emulator installation - Step 1

Battery Safety Terminal emulator installation - Step 2

Battery Safety Terminal emulator installation - Step 3


REMEMBER!

The installation should be performed by a professional mechanic, knowledgeable in the SRS.

We can share our knowledge and experience with you, but should the problem become more complex, you need to possess an adequate knowlege for us to be able to help you.

 

Should you need any help, write to us to:

contact@blshop24.com

In your message please describe your problem accurately and attach as many photos as you can – it will simplify us to help you – and please write what car you install it in.

 

Please remember that the emulator is made only for the test of installation and it should not be used as a solution that substitutes BST constantly!

 

Please pay attention when installing in order not to connect the emulator to the BST instead of connecting it to the car installation.  

 

up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl