BMW E63 E64 - US/ EU - seat occupancy sensor emulator - OCS Tester

PRODUCT

OCS Series Diagnostic Tester - seat occupancy sensor emulator and seatbelt emulator for BMW 6 Series E63 E64 2003/5-2010 with 3-wired seat mat (4 pin mat connector).
Before purchase please make sure the seat occupancy sensor has 3 wires. On E63 E64 2003-2006 there may be 2-wired seat mat - this emulator doesn't fit such version.
During the purchase please choose if you need the emulator for European or USA version BMW.

The emulators are equipped with connectors - easy installation.

PRODUCT DESCRIPTION

The device is manufactured in the EU and has been thoroughly tested.

The OCS series tester is an easy-to-connect yet advanced diagnostic tool designed to detect faults in the SRS system.

When connected to the vehicle's wiring, it emulates the operation of a functioning seat occupancy sensor and sends a signal to the airbag control unit indicating that an adult is seated. In the version with the seat belt buckle tester, the airbag control unit receives information that the seatbelt is fastened.

LED indicators provide visual confirmation of proper operation.

It features a simple design and straightforward installation. However, for safety reasons, installation should be performed by a qualified professional with knowledge of SRS systems.

INSTALLATION

Below is a simplified installation procedure (a detailed manual with a full device description - link below):

1. Turn off the ignition.

2. Locate the seat mat connector under the passenger seat and replace it with the emulator’s plug.

3. Find a big yellow connector under the passenger seat. Unlock and open this connector. Locate the seat belt buckle plug (wires colors: red, black) and disconnect it. Unplug the seatbelt connector and plug in the emulator plug instead.

4. Clear the error using appropriate diagnostic software (the light will disappear if it was on due to a damaged seat mat).

INSTALLATION INSTRUCTIONS - CLICK!

SHIPPING

We're a company from Poland, we ship orders paid till 1:00pm CEST every working day.

If you have questions about the shipping, please contact us.

IMPORTANT INFORMATION

1. A reliable diagnostic tool (an external device connected via OBD2) is essential for identifying faults.

2. The tester is intended for diagnosing issues within the SRS system. By emulating the function of a working seat occupancy sensor and seat belt buckle, it helps confirm or rule out a fault in the corresponding component.

3. If the SRS fault related to the seat occupancy sensor cannot be cleared after connecting the tester, this indicates that the tester has fulfilled its purpose — it confirms that the issue lies within the SRS system itself. This suggests the original seat occupancy sensor is likely functioning correctly, and the root cause may be found in the vehicle’s wiring or the airbag control unit.

4. The tester (emulator) is not an original vehicle component and is not a certified replacement for the factory-installed seat occupancy sensor. It does not have road-use homologation.

5. All work involving the SRS system should be carried out by a qualified professional with expertise in SRS systems.